# MCQs in Strength of Materials Part V - Answers

Answers key for the Compiled MCQs in Strength of Materials Part 5 of the series as one topic in General Engineering and Applied Sciences (GEAS) in the ECE Board Exam.

Below are the answers key for the Multiple Choice Questions in Strength of Materials Part 5.

201. Unit lateral deformation to the unit longitudinal deformation

202. Buckle

203. 50 kn.

204. 141.62 kn.m

205. None of the above

206. Equilibrium

207. 1.95 mm

208. 900

209. 5.046 mm.

210. Poisson’s ratio

211. Fourth power

212. The integral of y2Da

213. Proportional to the displacement

214. Where the shearing stress is zero

215. Unit lateral deformation to the unit longitudinal deformation

216. None in the list

217. 681816 N

218. None in the list

219. 21300 KN

220. 285 kn/m

221. Elastic range

222. Full sine wave

223. Divided by the maximum allowable bending stress

224. Length of the column

225. 228000 N

226. 49 kn/m

227. 33.7 mpa

228. 165 mpa

229. 30 x 109 mm4

230. 267 kn/m2

231. 100 MPa

232. 432 KN

233. 3.70 m

234. 3.0 m

235. 202.5 N-m

236.  190 x 106 mm4

237. 0.21 l

238. 3.95 m

239. 0.23 L

240. 2700/EI

241. Pab/L

242. 31.56 mm

243. 202.5 N-m

244. All of the three

245. 88419 MPa

246. 3 normal stresses + 3 shearing stresses

247. 4.22 m.

248. 880 N/mm

249. None in the list

250. Web neutral axis

### Online Questions and Answers in Strength of Materials Series

Following is the list of practice exam test questions in this brand new series:

Strength of Materials MCQs
PART 1: MCQs from Number 1 – 50                        Answer key: PART I
PART 2: MCQs from Number 51 – 100                   Answer key: PART II
PART 3: MCQs from Number 101 – 150                 Answer key: PART III
PART 4: MCQs from Number 151 – 200                 Answer key: PART IV
PART 5: MCQs from Number 201 – 250                 Answer key: PART V

Labels: